HOME HISTORY MATERIALS TOOLS BUILD HOW TO PLAY
The first step to building your Bean Bag Toss game is to cut your wood. The 2×4s will be cut for our frames and legs. For one set (2 Bean Bag Toss tables) you’ll need boards in the following lengths:
Cut the 2×4s with a mitre saw if available or a hand saw (use a mitre box to make sure your cut is nice and straight). If you plan it right, you should be able to get all these pieces with just the 4 2×4’s we mentioned. Don’t forget to factor in the saw blade’s width.
Because of this I suggest you measure, cut, measure, cut, and so on rather than make all your measurements at once.
If you purchased a larger piece of plywood, measure and cut your plywood down to size. One side should already be 4 feet long so now just cut it to be 2 feet wide. If available, use a circular saw, but this could also be done very carefully with a regular old hand saw. I wanted a nice straight edge so I fastened the other piece of plywood down next to my line so I could run my saw along it as a guide.
